9188S Pro Small Power Lift Recliner – 300 lb, Triple Motor, All-in-One Remote, Lay Flat, Heat & Massage
Meet the Irene House 9188S Pro — a small power lift recliner for people about 4'7"–5'5", built on the small-frame 9188S and upgraded. Start with the biggest change: our self-developed All-in-One hand control. Lift, recline, tilt the headrest, run the heat and massage, and save two favorite positions to memory — all from one remote instead of two.
Underneath, a third motor now drives the headrest independently, so you can change your neck angle without giving up the back angle or the leg height you had already settled into.
Sized for smaller frames: a seat 18" deep × 18" high and 20.5" wide, built for people about 4'7"–5'5" — hips up to about 18", weight up to roughly 120 lb, on a frame rated to 300 lb. Infinite positions from 105° to a fully flat 180°. Four-point vibration massage with dual-zone heating at the lumbar and seat. Raised side pockets, plus USB-A and USB-C charging.
35-day risk-free trial. 2 years electronics · 3 years upholstery · 3 years mechanism · 3 years frame.
Pairs Well With

Is it your size?
Sized down on purpose — front to back, side to side.
The seat is 18" deep × 18" high and 20.5" wide, with a 27.5" backrest — 2.5" shorter front to back and 2.5" narrower than the 9188 Pro (Medium). The frame is rated to 300 lb, but capacity isn't the question here — size is. It's built for smaller bodies: height roughly 4'7"–5'5", hips up to about 18", weight up to roughly 120 lb.

What the Pro changes
One remote. Not two.
The 9188S ships with two controllers — one for the chair, one for heat and massage. Owners told us what that means day to day: the one you need is the one you're not holding, and neither is easy to read once you're reclined.
The Pro replaces both with a single remote. Motion controls sit at the top. One circle handles lift, home, and two memory positions. Heat and massage each get their own row below. You learn it by where the buttons are, not by reading what they say.

Independent adjustment · REC 1 / REC 2
Three motors. Two positions you can save.
The 9188S moves the backrest and footrest independently. The Pro adds a third motor for the headrest — tilt your neck without giving up the back angle or the leg height you had already settled into.
Once a position works, press SET, then REC 1 or REC 2. Next time one press brings it back, instead of rebuilding it button by button.
The numbers that matter

Getting up shouldn't be the hard part
A steady lift toward standing.
The lift base tilts the whole chair forward and brings you smoothly toward standing — controlled the whole way by OKIN motors, starting from a seat just 18" off the floor.
The mechanism carries a 3-year written warranty.

Comfort that earns its place
Heat and massage, once you're supported.
Four-point vibration massage and dual-zone heating for the lumbar and seat, with an auto-off timer — on the same remote as everything else. Sitting well for hours is less about one perfect position than about being able to change it. Backrest, footrest and headrest move independently, so shifting your legs never costs you the back angle you had settled into.

Owners asked. We changed it.
Second generation, shaped by feedback.
Side pockets sit raised so the remote and everyday things stay within reach once you're reclined, and USB-A + USB-C charging ports sit right beside them.
Getting it into your home
The 9188S Pro ships in 2 boxes that may arrive on different days — don't worry if they don't come together. Assembly is tool-free in a few simple steps, but the boxes are heavy: we recommend two people to move them into place. Casters at the back make it easier to move the chair into position.
If it's not the right fit
35-day risk-free trial — if it isn't right once it arrives, contact our care team within 35 days of delivery. Coverage after that is written down, not implied: 2 years electronics · 3 years upholstery · 3 years mechanism · 3 years frame, with motors and remotes replaceable individually — no whole-chair swap.
What's different between the 9188S and the 9188S Pro?
Both are small-frame chairs for people about 4'7"–5'5", with a frame rated to 300 lb. The Pro adds a third motor for the headrest and replaces the two controllers with a single remote that also stores two positions you can return to with one press.
Who is the 9188S Pro for?
People with a smaller frame: height about 4'7"–5'5", hips up to about 18", weight up to roughly 120 lb. The frame is rated to 300 lb, but size decides the fit. If you're above those numbers, the 9188 Pro (Medium) will fit better.
Which small lift chair fits me — the 9188S Pro, the 9185 or the 9188 Pro (Medium)?
Start with your height. About 4'7"–5'5": the 9188S Pro — our smallest seat, 18" deep and 18" high, and it lies fully flat, with heat, massage and one remote. About 4'8"–5'7" and you'd like wooden armrests: the 9185. About 5'2"–5'9": the 9188 Pro (Medium).
Does it lie fully flat?
Yes — infinite positions from 105° to a fully flat 180°, with the backrest, footrest and headrest controlled independently.
How is it delivered?
In 2 boxes that may arrive on different days. Assembly is tool-free — the pieces slide together in a few steps, and you can always call us if you'd like a hand.
Full dimensions

Measured from the factory drawing, rounded to the nearest half inch.
- Weight capacity
- 300 lb
- Recommended height
- 4'7"–5'5"
- Seat width
- 20.5"
- Seat depth
- 18"
- Seat height (floor to seat)
- 18"
- Arm height
- 25"
- Backrest width
- 28.5"
- Backrest height
- 27.5"
- Overall width
- 29.5"
- Overall height
- 42.5"
- Overall depth (upright)
- 34.5"
- Reclined length
- 69.5"
- Recline range
- 105°–180°

